Type 1 – Normal portland cement. Type 1 is a general use cement.
Type 2 – Is used for structures in water or soil containing moderate amounts of sulfate, or when heat build-up is a concern.
Type 3 – High early strength. Used when high strength are desired at very early periods.
Type N Masonry Cement is used to make non-structural mortar. When mixed with sand this cement makes a great mortar for general purpose applications.
QUIKRETE Concrete Mix is the original 4000 psi average compressive strength blend of portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work.
QUIKRETE Fast-Setting Concrete Mix is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water.
QUIKRETE 5000 Concrete Mix is a commercial grade blend of stone or gravel, sand and cement specially designed for higher early strength. Ideal for cold weather application.
Achieves 5000 psi after 28 days.
QUIKRETE Sand/Topping Mix consists of a uniformly blended mixture of portland cement, commercial grade sands and other approved ingredients.
QUIKRETE Patio Paver Base Sand (Stone Dust) is an underlayment base sand used to provide a firm, stable base. For interlocking pavers, flagstone, brick and patio block.
QUIKRETE Mason Mix is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water.
QUIKRETE Mason Sand is suitable for field-preparation of mortar. Regionally available.
QUIKRETE All-Purpose Gravel is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.
Spec Mix Stone Veneer Mortar is a blend of Portland cement and lime, masonry cement or mortar cement, admixtures and dried masonry sand specifically designed to bond precast or lightweight masonry veneer units to interior or exterior concrete, masonry, metal studs or wood and lath substrates.
Spec Mix Polymer Modified Stone Veneer Mortar is a blend of Portland cement and lime, masonry cement or mortar cement, admixtures and dried masonry sand specifically designed to provide high bond strength and sag resistance to bond precast or lightweight masonry veneer units to interior or exterior concrete, masonry, metal studs or wood and lath substrates.
Spec Mix Fiber Base Coat is designed for use in both One Coat and traditional Scratch & Brown applications. SPEC MIX FBC can be applied over Open Framing with Insulation Board. Over – framed wall construction that includes a solid backing: including Fiberboard, Gypsum Sheathing and Wood Based Sheathing. SPEC MIX FBC can also be applied over Concrete and Masonry.